Siemens 9410RC User Manual page 168

9410 series
Connector type
Mode
Data rate
FTP
IEC61850 maximum simultaneous client
connections
RS-485 communications
Number of ports
Maximum cable length
Maximum number of devices (unit loads)
Parity
Baud rate
Real-time clock
Clock drift (time error)
Battery backup time
Remote display
IP degree of protection
Cable
Mounting position
Display type
Display backlight
Viewable area
Keypad
Option modules
US2:948M2AO4AI Analog (2 out, 4 in)
Maximum number of modules
Input resistance
Max analog input current/voltage
Maximum meter operating temperature
168
RJ45 modular jack (2)
10Base-T, 100Base-TX, Auto-MDIX
up to 100 Mbps
Maximum simultaneous transfer connections (sessions): 2
Default timeout period: 90 seconds
4
1
1200 m (4000 ft)
Up to 32 devices on the same bus
None, even, odd
2400 – 115200, recommend 19200
20 ppm max at 25 °C (77 °F)
Minimum 7 years under specified storage conditions
Front: IP54
Rear: IP30
CAT5/5e UTP (use unshielded connector only)
Vertical
1/4 VGA color graphic TFT LCD 320 x 240 resolution
White LED
70.6 x 52.9 mm (2.78 x 2.08 in)
5 button
4
< 300 Ω (current mode)
> 500 kΩ (voltage mode)
20 mA / 30 V DC
25 ºC to Max temp (-13 ºF to Max temp)
Maximum operation temperature is based on the quantity and type of
attached option modules. See Maximum operating temperature, page
166.
Specifications
7EN05-0336-01