Advertisement
4.
Apply lubricant to the Dome cover's water-proof rubber to make the
installation process smoother.
NOTE: The tiny protrusion on the dome cover must align with one of
the four holes on the dome body.
5.
Attach the Dome cover to the Dome body by gently pressing down on
the sides of the Dome cover with both hands.
NOTE: DO NOT press the cover from the top as this may cause
damage to the Dome body.
6.
Screw the Dome cover and body together.
Advertisement
Need help?
Do you have a question about the OSD-040 36x Series and is the answer not in the manual?
Questions and answers