Gamatronic Electronic Industries Ltd.
respective input terminals ("Rectifier ac input" and "Bypass ac input"), also
shown in Figure 20-4. Use the appropriate grade of wire as specified in Table
15-1 on page 64, or according to local electrical codes.
7.
Run the batteries cable through the cable holder labeled "Batteries" in Figure
20-4. Use the appropriate grade of wire as specified in Figure 20-4 on page 64,
or according to local electrical codes.
8.
Tighten all cable holders so that the cables are fastened securely.
Continue to section 15.3.3, "Battery installation".
86
POWER + SA User Guide (UL), Release 1.8