Read The Diagnostics Information - Hach TU5200 User Manual

Problem
Selected documents do not
show on the display.
The network connection does
not show.

Read the diagnostics information

1. Push Diagnostics.
2. Select an option.
Option
Instrument Information Shows specific information such as the instrument name, serial number,
Signals
Instrument Backup
Instrument Update
Service Time
Factory Service
Replacement parts and accessories
Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Replacement parts
Description
Dust cover
Power supply, 100–240 V, 50/60 Hz
StablCal calibration set (20 NTU cal, 600 NTU cal, 10 NTU ver) with RFID
StablCal calibration set (20 NTU cal, 600 NTU cal, 10 NTU ver) with no RFID
Sample vials with protective caps (2x)
Vial stand
22 English
Possible cause
The document is not a PDF file.
There is no connection to the
DHCP server.
The connection was not
correctly configured.
Description
instrument version, location and MAC address.
Shows the signals for the lid, vial, turbidity, condensation, and fouling. If a USB
flash drive or PC is connected to the instrument, send data.
Sets the instrument backup settings to store or restore.
Connect the USB memory into a USB port and push OK to start the instrument
update.
Shows the last service date and the next service date.
Only used by authorized factory service personnel.
W A R N I N G
-BETA DRAFT-
Solution
Make sure that the document is a PDF file.
Contact the network administrator. If
necessary, contact technical support.
Make sure that the settings are correctly
entered.
Item no.
LZV947
LZV798
LZY835
LZY898
LZV946
LZV952