Turning Off The Radio - Symbol MC18 Product Reference Manual

Turning Off the Radio

To turn off the WLAN radio click the
Wireless Connection Status Icon
Wireless Connection Status Icon - Radio On
Figure 3-2
A red i appears at the bottom of the icon indicating that the radio is disabled (off).
To turn the radio back on, click the
Wireless Connection Status Icon
Wireless Connection Status Icon - Radio On
Figure 3-3
The red X disappears from the icon indicating that the radio is enabled (on).
Bluetooth
Microsoft Bluetooth stack only for printing use case Version 2.1 with EDR compliance Maximum theoretical
bandwidth of 921.6Kbps.
The MC18 supports the following Bluetooth profiles:
•
Generic Access Profile - GAP
•
Service Discovery Access Profile - SDAP
•
Serial Port Profile – SPP
•
Wake on BT
Bluetooth Printing
Use this procedure to pair the MC18 to a Bluetooth printer:
Launch BT Explorer by clicking the BT Icon in notification area.
1.
Click File -> New Connection.
2.
Wireless Connection Status
Wireless Connection Status
Wireless Applications
icon on the task tray and select
icon on the task tray and select
3 - 5
.
Disable Radio
.
Enable Radio