Led Indications - Symbol MC18 Product Reference Manual

On the Cradle Applications menu, click Cradle Utility.
4.
Click the Settings tab to set the cradle information:
5.
Row ID: The cradle row number in the dispenser wall.
a.
Column ID: The cradle column number in the dispenser wall.
b.
Wall ID: The number of dispenser wall where the cradle is positioned.
c.
Unlock Period: The number of seconds that pass from the time the unlock signal is received to
d.
unlocking the MC18 from the cradle.
Unlock: Press Unlock to manually unlock the MC18 from the cradle.
e.
LED: Check the LED box to enable the cradle LED indication.
f.
Smooth Effect: Check the Smooth Effect box to enable soft on/off blink of LED.
g.
LED Setting > On: The cradle LED is set to blink during unlock. Set the duration that the LED remains
h.
off.
LED Setting > Off: The cradle LED is set to blink during unlock. Set the duration that the LED will
i.
remains off during a blink.
LED Setting > Count: The cradle LED is set to blink during unlock. Set the number of blinks that the
j.
LED after receiving an unlock signal.
Blink: Click to test the cradle LED operation.
k.
Write Data: Program the information shown on the screen to the cradle memory.
l.
Reset Row: Remove row information from the cradle memory.
m.
Reset Column: Remove column information from the cradle memory.
n.
Special Considerations 6 - 11