Advertisement
Place Filament and Loading Filament
1. Remove PLA filament from packaging.
2. Place filament in spool slots located on both sides of the printer.
3. As shown below, insert spool holder into the center hole of the filament. Rotate 90 degrees to
lock. To remove spool holder, rotate in the opposite direction.
Fixed the filament by left spool holder
Fixed the filament by right spool holder
Ensure filament is placed in spool slots with correct orientation.
Guide Wire
Guide Wire
Correct Direction
Wrong Direction
10
Advertisement
Need help?
Do you have a question about the INVENTOR and is the answer not in the manual?
Questions and answers