Line Protection Function During Data Transmission; On-Hold Function; Store And Redial Function - Aastra 5000 User Manual

Other functions

Line protection function during data transmission

You want to send data via your telephone line (using a modem or Minitel on the line) and
therefore do not want to be disturbed by a call (i.e. non-presentation of waiting calls).
You can activate this function selectively during a call (see section During a call).
To have this function continuously activated, we recommend that you contact your system
operator.

On-hold function

The on-hold function can be programmed via the programmable key, only from the iPBX
management portal. If you use this function regularly, contact your system operator and
ask him to program it.
-> For more detailed information on the use of the key, refer to the following chapter:
"Placing the party on hold and resuming the call on the same phone" page 24.

Store and redial function

If your party does not answer or is busy, you can temporarily record his number in order to
call him back later (even if you dial other numbers in the meantime).
The store and redial function can be programmed via a programmable key, only from the
iPBX management portal. If you use this function regularly, contact your system operator
and ask him to program it.
To store the number:
Storage
60
If your party is busy or does not answer,
1 - press the Store and Redial programmed key.
-> An audible message indicates that the action has been
validated. This number remains stored until it is redialled or
erased.