User's Settings List - TechWind SDK-500 User Manual

8. USER'S SETTINGS LIST

Parameter
1.1 Width
1.2. Weight
2.1. V Opening
2.2. V Closing
3.2. Init. speed
3.3. Close force
3.4. Open force
3.5. Open tigh.
3.6. Closed tigh.
3.7. Tighten mode
3.8. OPEN switch
3.9. Lock zone
3.A. Lock. speed
3.C. Threshold
3.E. Pause time
3.F. Force reduc.
4.1. Driver mode
4.2. Door number
5.1. OPENING inp.
5.2. CLOSING inp.
5.3. INSTALL inp.
6.1. OPEN output
6.2. CLOSED outp.
6.3. BARRIER out.
7.1. External
9.1. Language
User's manual for
Description
Parameters of "1. Doors data" menu
Door width
Door weight
Parameters of "2. Speeds" menu
Door opening speed
Door closing speed
Parameters of "3. Calibration" menu
Initialisation and calibration speed
Closing force
Opening force
tightening force of open door
tightening force of closed door
Condition of using tightening force of closed door
End switch (terminal position contact) activation
Lock zone length
Locking speed
Permissible percentage exceedance of the average
current value of opening+closing cycle
Delay of the automatic closing of the door
Force reduction at the ends of the door
Parameters of "4. Working mode" menu
Device control mode
Option used while remote control
Parameters of "5. Inputs" menu
{OPEN INP.} input activation
{CLOSE INP.} input activation
{INSTALL} input activation
Parameters of "6. Outputs" menu
{OPEN} output operation mode
{CLOSED} output operation mode
{BARRIER} output operation mode
Parameters of "7. Photocell" menu
{EXT. BARRIER} input operation mode
Parameters of "9. Region" menu
Language of menu content
elevator door controller SDK-500
Default value User's value
90,0 cm
100 kg
0,35 m/s
0,35 m/s
50,0 %
2,00 A
2,80 A
0,60 A
0,30 A
continue
inactive
4,0 cm
MIN (2.5 cm/s)
35 %
10 s
50 %
external inputs
0
active
active
active
normal open
normal open
normal open
inactive
polish
Desc.
page
18
18
18
18
19
20
20
20
21
21
21
21
21
22
22
22
23
23
23
23
24
24
24
24
24
25
33