Avaya 1616 User Manual page 7

Name
Hold
Conference
Transfer
Drop
Volume
Headset
Mute
Speaker
Feature Buttons
and Call/Line
Appearance
Buttons
Avaya 1616/1616-I IP Deskphone User Guide
Press the Hold button to put the active call on hold.
Press the Conference button to add another party to an
existing call.
Press the Transfer button to transfer a call to another
number.
Press the Drop button to drop the active call. While on a
conference call, press the Drop button to drop the last
person added to the conference call.See
person added from a conference call
Dropping a person from a conference call
more information.
Press + or - on the Volume button while active on the
handset, headset, or speaker to adjust the volume. To adjust
the volume of the ringer, press + or - on the Volume button
while the handset and speaker are inactive.
Press the Headset button to use the headset if it is
connected. Only HIS headset cords are compatible with
your phone.
Press the Mute button to mute a call in progress. To take a
call off mute, press Mute again.
Press the Speaker button to use the speakerphone. To take
a call off speakerphone, lift the handset or press the
Headset button.
There are 16 buttons that can be programmed as either call/
line appearance buttons or feature buttons. Press a call/
line appearance button to make or answer a call or resume a
call on hold. Press a labeled feature button to enable or
disable that feature. The feature buttons provide access to
the Avaya call management system features that have been
administered for your extension. The green LED next to
each feature button indicates if the feature is currently on or
off. If the light is on, the feature is on. The feature buttons
provide the same features that are available in the features
menu. For more information about the features menu, see
Features menu on page 41. For more information about
the feature buttons, see
page 37.
Overview of phone buttons and features
Description
Dropping the last
on page 20 or
on page 21 for
Advanced telephone features on
February 2010 7