Radware Alteon Installation And Maintenance Manual page 52

Radware Alteon Installation and Maintenance Guide
Initial Configuration
Deploying the Package
To deploy the package
1. Unpack the Alteon VA package. For example:
# tar -xzvf Alteon-28.1.0.0_VA_kvm.tgz
2. Run the setup script from
3. Select a location for the new image: remote or local host.
4. At the prompt, enter the remote host IP.
Note: Because in the RH KVM environment, you cannot install directly onto the host machine,
the remote host in this context is the Network-attached storage.
52
./install/bin/rhev_setup
.
Document ID: RDWR-ALOS-V2815_IG0203