Table of Contents
Advertisement
Radware Alteon Installation and Maintenance Guide
Alteon Application Switch Platforms
Table 7: Alteon Application Switch 5412 and 5412 XL Front Panel
Feature
Label/Description
10 (Ten) Gigabit Ethernet (10GbE) ports for traffic or in-band management. The
platform supports four XFP ports.
LEDs:
•
ACT—flashing indicates activity.
•
LINK—green indicates 10GbE.
SFP GbE ports for traffic or in-band management. The platform supports four SFP
ports.
LEDs:
•
ACT—flashing indicates activity.
•
LINK—green indicates 1000 Mbit/s.
RJ-45 GbE ports for traffic or in-band management. The platform supports eight
GbE ports.
LEDs:
•
ACT—flashing indicates activity.
•
LINK—green indicates 1000 Mbit/s. Yellow indicates 10 or 100 Mbit/s.
Power button. Turns power on and off. Pressing the button for 1 to 4 seconds
causes a graceful shutdown of the system, thus preserving system integrity.
Pressing the button for more than four (4) seconds causes the hardware to
power down.
Reset button. Resets the device.
USB port for recovery.
Management port. The MNG 1 port is an RJ-45 10/100/1000 Ethernet port,
which is for management only. The MNG 2 port is currently non-operational.
LEDs:
•
ACT—flashing indicates activity.
•
LINK—green indicates 1000 Mbit/s. Yellow indicates 10 or 100 Mbit/s.
RS-232 DE-9 port for out-of-band management.
Status LEDs:
•
PWR—green indicates nominal operation. Red indicates that one of the two
power cables is not supplying power or that one of the power supplies is
malfunctioning. When the LED is red, a qualified service person should
immediately check the power source and the power supply.
•
FAN—green indicates nominal operation. Red indicates that one or more
fans is not operating.
•
SYS OK—green indicates nominal operation. Red indicates that the device is
booting. Red or alternating red and green indicates a warning (for example,
the temperature is high, but still in the allowed range).
34
Document ID: RDWR-ALOS-V2815_IG0203
Hide quick links:
Advertisement
Table of Contents
