Toshiba DB-EA4D Command Manual page 30

Duplex printing mode (Normal case)
1. Select Duplex Mode by 1F 62 02 00H
2. Select Front side by 1F 63 00 00H
3. Send Print data (Front side)
4. Send Form Feed code (1B 0CH) -> This can be omitted.
5. Select Back side by 1F 63 01 00H
6. Send Print data (Back side)
7. Send Form Feed code (1B 0CH) -> This can be omitted.
8. Send Start double side printing by 1F 64H
Front
side
Page1
9. Perform Full Knife Cut by 1B 69H
-> The paper is cut at the end of the longer page and the left paper in the printer is returned to the
standby position automatically.
10. Select Front side by 1F 63 00 00H
11. Send Print data (Front side)
12. Send Form Feed code (1B 0CH) -> This can be omitted.
13. Send Start double side printing by 1F 64H
Front
side
Page3
14. Perform Knife Cut by 1B 69H -> The paper is cut at the end of the page even if there is no data in the back
side.
-> The paper is cut at the end of the longer page and the left paper in the printer is returned to the
standby position automatically
Start printing
Back
Page2
side
Transporting to the cut position of the longer page by 1F 64H.
Start printing
Transporting to the cut position by 1F 64H.
26 DB-EA4D Command manual (rev.00)