Rolling Ascii Print Test (Simplex Printing) - Transaction Test; H Print Test (Simplex Printing) - Transaction Test - Toshiba DB-EA4D Command Manual

2.2.16 Rolling ASCII print test (Simplex printing) - transaction test

ASCII: GS d 03H n
Hexadecimal: 1D 64 03 n
Decimal: 29 100 03 n
Values of n: Reserved (0x00)
This command performs rolling ASCII print test only once, so the page number is always 00000001. If
there are any printable data when the printer receives this command, the printer prints out previous data.
After that, the printer performs this command.
Page number
* It's for the paper length mode. If the paper type is BM mode, the paper is cut at the next BM (w/ Cutter) or
fed the next BM to cut position (w/o Cutter). If the paper type is Label mode, the paper is cut at the next
gap (w/ Cutter) or fed the next gap to cut position (w/o Cutter).

2.2.17 H print test (Simplex printing) - transaction test

ASCII: GS d 04H n
Hexadecimal: 1D 64 04 n
Decimal: 29 100 04 n
Values of n: Reserved (0x00)
This command performs H print test only once, so the page number is always 00000001.
If there are any printable data when the printer receives this command, the printer prints out previous data.
After that, the printer performs this command.
Page number
* It's for the paper length mode. If the paper type is BM mode, the paper is cut at the next BM (w/ Cutter) or
fed the next BM to cut position (w/o Cutter). If the paper type is Label mode, the paper is cut at the next
gap (w/ Cutter) or fed the next gap to cut position (w/o Cutter).
00000001
!!"#$%&'()*+,-./01234･･･････････････････････
!"#$%&'()*+,-./012345･･･････････････････････
"#$%&'()*+,-./0123456･･･････････････････････
Depend on a paper width
(Refer to Printer Basic Function.)
00000001
HHHHHHHHHHHHHHHHHHHH････････････････････････
HHHHHHHHHHHHHHHHHHHH････････････････････････
Depend on a paper width
(Refer to Printer Basic Function.)
15
2.75inch
5lpi
(70mm)*
2.75inch
5lpi
(70mm)*
DB-EA4D Command manual (rev.00)