Advanced Raster Graphics; Feed N1 N2 Dot Rows - Toshiba DB-EA4D Command Manual

2.2.10 Advanced Raster Graphics

ASCII: ESC . c rL rH i d1 d2...dn
Hexadecimal: 1B 2E c rL rH i d1 d2...dn
Decimal: 27 46 c rL rH i d1 d2...dn
Value of c: 00H : Black only
1'st data(d1 - dn) is for red&black color and 2'nd data(d1 - dn) is for black color only.
Value of r: Number of vertical dot count:
Range of r: [for 203dpi printer]:
Value of i: Reserved (0x00)
Value of n: Number of horizontal data count
[for 203dpi printer]:
Paper width in
configuration
58 mm
80 mm
4 inch
5.1 inch
When the image data size specified by this command is more than the image buffer size, overflowed image
data is discarded.

2.2.11 Feed n1 n2 Dot Rows

ASCII: US a n1 n2
Hexadecimal: 1F 61 n1 n2
Decimal: 31 97 n1 n2
Value of n: n1 + n2 x 256
[for 203dpi printer] 0 ≤ (n1 + n2 x 256) ≤ 4434
Range of n:
[for 300dpi printer] 0 ≤ (n1 + n2 x 256) ≤ 6553
Feed the paper (n1,n2) dot rows without printing.
(rL + rH x 256)
0 ≤ (rL + rH x 256)≤ 4434
108 x (rL + rH x 256)
Null length in left side
bytes dots
27 216
18 144
7 56
2 16
9
Printable length
bytes dots
54 422
72 576
94 752
104 832
DB-EA4D Command manual (rev.00)
Null length in right side
bytes dots
27 216
18 144
7 56
2 16