Toshiba DB-EA4D Command Manual page 29

Simplex printing mode (Normal case)
1. Select Simplex Mode by 1F 62 00 00H
2. Select Front side by 1F 63 00 00H(This can be omitted.)
3. Send Print data
4. Send Form Feed code (1B 0CH)
Front
side
Page
5. Perform Knife Cut by 1B 69H
-> The paper is cut at the end of the page and the left paper in the printer is returned to the standby
position automatically.
Simplex printing mode (No cut command case)
1. Select Simplex Mode by 1F 62 00 00H
2. Select Front side by 1F 63 00 00H(This can be omitted.)
3. Send Print data
4. Send Form Feed code (1B 0CH)
Page1
Page1
5. Send Print data (Page2)
-> The paper is returned to the standby position of the next page without cutting the paper.
6. Send Form Feed code (1B 0CH)
Page1
Page2
Next Page
7. Perform Knife Cut by 1B 69H
-> The paper is cut at the end of the page and the left paper in the printer is returned to the standby
position automatically.
Start printing
Transporting to the cut position by Form Feed.
Start printing
Transporting to the cut position by Form Feed.
Start printing
Transporting to the cut position by Form Feed.
25 DB-EA4D Command manual (rev.00)