Breville BFP800 XL G16 Instruction Book page 13

NOTE
As a safety feature, the food processor will
automatically switch off when the lid is
unlocked; however, it is good practice to
manually switch off the food processor using
the POWER/OFF button before removing
the lid.
15. Remove the processing bowl (before
removing blade or discs) by turning it
counter-clockwise until the handle is in line
with the ALIGN Handle graphic. Lift the
bowl off the motor shaft. When removing
the discs - carefully remove by gripping the
plastic hub on the center of the disc and
lifting the disc up and away from the pin on
the spindle.
NOTE
• Reassemble the food processor by locking
the processing bowl into position before
attaching blade, disc or lid.
• Care should be taken when removing the
food from the processing bowl by ensuring
the motor and processing blade or disc has
completely stopped before disassembling.
Ensure the POWER/OFF button is pressed
to switch the motor off, and unplug the cord
from the power outlet before removing the
lid from the processing bowl. The processing
bowl should then be unlocked from the
motor body, then the processing blade or
disc should be removed before attempting to
remove the processed food.
OVERLOAD PROTECTION SYSTEM
• If the motor overloads, the food processor will
go to STANDBY mode and the OVERLOAD
icon in the LCD will start to flash. The food
processor can still be switched off by pressing
the POWER/OFF button. To operate the food
processor again, allow the machine to cool for
approximately 30 minutes.
• Some stiff mixtures, such as dough, may
cause the dough blade to rotate more slowly
than normal. If this happens, do not process
for longer than 1 minute.
• If the blades or discs should jam while
processing, ensure the POWER/OFF button
is pressed to switch the motor off and then
unplug the power cord from the power outlet.
Remove the processing lid and adjust any
food wedged between the blade and the
processing bowl or in the disc. Replace the lid
and proceed as normal. If this occurs again,
the processing bowl may be overloaded,
so remove some of the food and process in
smaller batches.
NOTE
The food processor is designed so the motor
will not operate without the processing bowl
and lid correctly locked into position and the
pusher inserted into the feed chute. In the
event that the food processor starts without the
lid correctly locked into position, immediately
disconnect at the power outlet and contact
Breville Consumer Support.
13