Sequence of Assembling
(1) Install the transfer unit PU into the printer.
(2) Secure the transfer unit PU with the knob screw (2 pieces).
(3) Close the rear cover.
< How to reset the 120K Kit >
(1) Press the Menu/Set, Black Start,
mode.
(2) Press the 8 and 0 keys in this order to indicate the LOG INFO message on the LCD, and
press the Black Start key several times until the "120K_CH:" message appears.
(3) Press the 2, 7, 8 and 3 keys in this order to reset the counter of the 120K Kit.
(4) Press the 9 key twice so that the printer returns to the standby status.
CAUTION
• This work is one of periodic replacement jobs, but cannot be the customer. This should be
implemented upon request of customer or at periodic maintenance.
• After the replacement, confirm the improvement of print quality failure by test print.
Fig. 6-27
,
,
and
keys in this order to enter the maintenance
6 -2 1
manuals4you.com
manuals4you.com
Transfer unit PU
Knob screws
Rear cover
Confidential