Brother MFC-9420CN Service Manual page 338
Hide thumbs
Also See for MFC-9420CN:
- Service manual (428 pages) ,
- User manual (195 pages) ,
- Software user's manual (145 pages)
Table of Contents
Advertisement
Selector
Function
No.
1
Not used.
2
Dialing during document
reading into the temporary
3
memory in in-memory message
transmission
No. of CNG cycles to be
detected
4
(when the line is connected via
5
the external telephone except in
the external TAD mode or via
the built-in telephone)
No. of CNG cycles to be
detected
(when the line is connected via
the external telephone in the
6
external TAD mode, via the
7
built-in telephone in the TAD
mode, or via the machine in the
automatic reception of the F/T
mode)
8
Not used.
Selector 3: Dialing during document reading into the temporary memory in in-memory message
transmission
If this selector is set to "0," the machine waits for document reading into the memory to complete
and then starts dialing. This enables the machine to list the total number of pages in the header of
the facsimile message.
Selectors 4 and 5: No. of CNG cycles to be detected (when the line is connected via the external
telephone except in the external TAD mode or via the built-in telephone)
The machine interprets a CNG as an effective signal if it detects the CNG by the number of cycles
specified by these selectors when the line is connected via the external telephone except in the
external TAD mode or via the built-in telephone.
Selectors 6 and 7: No. of CNG cycles to be detected (when the line is connected via the external
telephone in the external TAD mode, via the built-in telephone in the TAD mode, or
via the machine in the automatic reception of the F/T mode)
The machine interprets a CNG as an effective signal if it detects the CNG by the number of cycles
specified by these selectors when the line is connected via the external telephone in the external
TAD mode, via the built-in telephone in the TAD mode, or via the machine in the automatic
reception of the F/T mode.
WSW26
(Function setting 4)
0: Disable
No. 4
5
0
0
0
1
1
0
1
1
No. 6
7
0
0
0
1
1
0
1
1
App. 4-30
manuals4you.com
manuals4you.com
Setting and Specifications
1: Enable
:
0.5
:
1
:
1.5
:
2
:
0.5
:
1
:
1.5
:
2
(A)
(B)
(C)
(D)
(A)
(B)
(C)
(D)
Confidential
Advertisement
Table of Contents
Troubleshooting
