Eeprom Customizing (Entering Of The Country Code For Europe/Oceania.); (Function Mode 52) - Brother MFC-9420CN Service Manual

LCD
FU
OB
OR
TR
(2) Change the detecting conditions to check that the indication on the LCD changes
according to the sensor states. For instance, insert paper through the document front (or
rear) sensor or the registration sensor (s), open the front cover or the document cover,
remove the toner cartridge, jam paper at the paper outlet, insert paper from the manual
feeder, and load a recording paper tray, etc.
(3) Press the Stop/Exit key. The machine beeps for one second and return to the initial
stage of the maintenance mode.
NOTE: If you have opened and closed the front cover during the above procedure, you need
to open and close the front cover again upon completion of the procedure.
8.4.10

EEPROM Customizing (Entering of the country code for Europe/Oceania.)

(Function code 52)
NOTE: This function is available only for the OCEANIA, EUROPE version
(The function is enabled only when the country code for Europe or Oceania is entered in
Function code 74.)
Function
This function allows the user to change the country code in the state that the country code
for Europe or Oceania is entered.
Operating Procedure
(1) Press the 5 and 2 keys in this order in the initial stage of the maintenance mode.
The "SET COUNTRY" and "PRESS SET KEY" appear alternately on the LCD.
(2) Press the Menu/Set key.
OCEANIA version: The "AUSTRALIA" and "SELECT ↑↓ & SET" appear alternately.
EUROPE version: The "U.K" and "SELECT ↑↓ & SET" appear alternately.
(3) Use the
The machine displays the "ACCEPTED" on the LCD and switches back to standby.
Sensors
Fusing unit sensor
OPC belt sensor
OPC roller sensor
Transfer roller sensor
and keys to select the target country and press the Menu/Set key.
8 -1 5
Sensing status
No fusing unit detected.
No OPC belt detected.
No OPC roller detected.
No transfer roller detected.
Confidential