Waste Toner Auger Pu; Waste Toner Agitator Pu - Brother MFC-9420CN Service Manual

5.1.24 Waste Toner Auger PU

(1) Remove the setscrew (BT3x8, 2 pieces) of the waste toner auger PU.
(2) Remove the waste toner auger PU from the frame.
NOTE:
• In this instance, do not cause the waste toner fall on the floor.
•
If the installation part is stained, clean it off with the vacuum cleaner that is for the toner
only or with cloth.

5.1.25 Waste Toner Agitator PU

(1) Remove the coupling gear from the inside of the frame.
(2) Pull out the waste toner agitator PU.
BT3x8

Waste toner auger PU

Fig. 5-68
Coupling gear

Waste toner agitator PU

Frame
Fig. 5-69
5-43
manuals4you.com manuals4you.com
BT3x8
Frame
Confidential