Modifying The Startup Configuration - Cisco Catalyst 2360 Software Configuration Manual

Modifying the Startup Configuration

...!
interface VLAN1
ip address 172.20.137.50 255.255.255.0
no ip directed-broadcast
!
ip default-gateway 172.20.137.1 !
!
snmp-server community private RW
snmp-server community public RO
snmp-server community private@es0 RW
snmp-server community public@es0 RO
snmp-server chassis-id 0x12
!
end
To store the configuration or changes you have made to your startup configuration in flash memory, enter
this privileged EXEC command:
Switch# copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
This command saves the configuration settings that you made. If you fail to do this, your configuration
will be lost the next time you reload the system. To display information stored in the NVRAM section
of flash memory, use the show startup-config or more startup-config privileged EXEC command.
For more information about alternative locations from which to copy the configuration file, see
Appendix B, "Working with the Cisco IOS File System, Configuration Files, and Software Images."
Modifying the Startup Configuration
These sections describe how to modify the switch startup configuration:
•
•
•
•
•
See also
Images,"
Catalyst 2360 Switch Software Configuration Guide
3-12
Default Boot Configuration, page 3-13
Automatically Downloading a Configuration File, page 3-13
Booting Manually, page 3-14
Booting a Specific Software Image, page 3-14
Controlling Environment Variables, page 3-15
Appendix B, "Working with the Cisco IOS File System, Configuration Files, and Software
for information about switch configuration files.
Chapter 3 Assigning the Switch IP Address and Default Gateway
OL-19808-01