Recovering Blocked Pools - Hitachi VSP G1000 User Manual

Related tasks
•
•
•
•

Recovering blocked pools

You can recover blocked pools using the Restore Pools window.
The pool recovery time depends on pool or V-VOL usage and system
workload. Calculate roughly 20 minutes of recovery time for every 100 TB of
pool or V-VOL usage.
Caution: Recover blocked pools for disaster recovery purposes only.
Procedure
1.
2.
3.
4.
186
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
Resynchronizing Thin Image pairs
Deleting Thin Image pairs
Increasing pool capacity
Recovering blocked pools
In the Explorer pane, click Storage Systems, expand the storage
system tree, and then click Pools.
In the Pools tab, from the list of pools, select the check box for the pool
that you want to recover, click More Actions > Restore Pools, and
then confirm the settings.
Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the
following:
\ / : , ; * ? " < > |
If you want to monitor the task after submitting it, select Go to tasks
window for status.
Monitoring and maintaining Thin Image
on page 144
on page 146
on page 173
on page 186