Intended Audience; Product Version; Release Notes; Changes In This Revision - Hitachi VSP G1000 User Manual

Intended audience

This document is intended for system administrators, Hitachi Data Systems
representatives, and authorized service providers who install, configure, and
operate the storage system.
Readers of this document should be familiar with the following:
• Data processing and RAID storage systems and their basic functions.
• The Hitachi Virtual Storage Platform storage system and the Hardware
• The Device Manager - Storage Navigator software and the System
• Hitachi Dynamic Provisioning, Hitachi Dynamic Tiering, Hitachi LUN

Product version

This document revision applies to the following microcode or firmware:
• VSP G1000, G1500, and VSP F1500: microcode 80-05-4x or later
• VSP G200, G400, G600, G800, VSP F400, F600, F800: firmware 83-04-4x
• SVOS 7.2 or later

Release notes

Read the release notes before installing and using this product. They may
contain requirements or restrictions that are not fully described in this
document or updates or corrections to this document. Release notes are
available on Hitachi Data Systems Support Connect:
knowledge.hds.com/Documents.

Changes in this revision

Expanded enhancements for DP pools, which include the ability to set the
maximum reserved V-VOL capacity against the pool capacity, when creating a
DP pool.

Related documents

Hitachi Virtual Storage Platform Gx00 and Fx00 documents
• Product Overview, MK-94HM8013
10
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
Guide for your storage system model.
Administrator Guide for your storage system model.
Manager, Hitachi LUN Expansion, Hitachi Virtual LVI, Hitachi Virtual LUN,
and Hitachi Data Retention Utility.
or later
Preface
https://