Hitachi VSP G1000 User Manual page 112

4.
5.
6.
112
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
In the Change LDEV Settings window, complete the following items,
and then click OK:
• LDEV Name
Enter the prefix characters and the initial number for the LDEV.
• Initial LDEV ID
Enter the LDKC, CU, and LDEV numbers, and the interval. To confirm
used LDEVs, click View LDEV IDs.
• MP Blade (VSP G1000, G1500, and VSP F1500)
Select the MP blade identifier to which you want to assign the LDEV. To
specify an MP blade identifier, select the MP blade ID. To assign an
arbitrary MP blade identifier, click Auto.
• MP Unit ID (VSP Gx00 models and VSP Fx00 models)
Select the MP Unit ID to which you want to assign the LDEV. To specify
an MP Unit ID, select the MP Unit ID. To assign an arbitrary MP Unit
ID, click Auto. The MP Unit ID that you can select depends on the
storage system model.
Click Finish, and then confirm the settings.
Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the
following:
\ / : , ; * ? " < > |
Configuring Thin Image