Hitachi VSP G1000 User Manual page 216

9728
9729
972A
972C
972E
972F
9730
9731
9732
9733
9734
9735
973B
973C
973D
973E
973F
9740
9742
216
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
SSB2 CCI command
paircreate, pairsplit,
pairresync,
pairresync -restore
paircreate, pairsplit,
pairresync,
pairresync -restore
paircreate
paircreate
paircreate
paircreate
paircreate
pairresync -restore
pairresync -restore
pairresync -restore
pairresync -restore
paircreate
All commands
All commands
paircreate, pairsplit,
pairresync,
pairresync -restore
paircreate, pairsplit,
pairresync,
pairresync -restore
paircreate, pairsplit,
pairresync,
pairresync -restore
paircreate
paircreate
CCI command reference for Thin Image
The command ended abnormally because you specified a volume
that is in the process of being shredded or formatted as the HTI P-
VOL.
The command ended abnormally because you specified a volume
as the HTI P-VOL, and that volume has an emulation type other
than OPEN-V.
You cannot create the HTI pair because the volume you specified
as the HTI P-VOL has the command device setting.
You cannot create the HTI pair because the capacity of the volume
you specified as the HTI P-VOL exceeds the supported size.
You cannot create the HTI pair because the capacity of the volume
you specified as the HTI S-VOL exceeds the supported size.
You cannot create the HTI pair because you specified a V-VOL as
the HTI P-VOL.
You cannot create the HTI pair because you specified a pool-VOL
as the HTI P-VOL.
You cannot restore the HTI pair because the HTI P-VOL and TC P-
VOL share a volume, and the TC pair is not split ("PSUS" status) or
is suspended and blocked ("PSUE" status).
You cannot restore the HTI pair because the HTI P-VOL and UR P-
VOL share a volume, and the UR pair is not split ("PSUS" status) or
is suspended and blocked ("PSUE" status).
You cannot restore the HTI pair because the HTI P-VOL and TC S-
VOL share a volume.
You cannot restore the HTI pair because the HTI P-VOL and UR S-
VOL share a volume.
You cannot create the HTI pair because you specified a UR journal
volume as the HTI P-VOL.
The command ended abnormally because the LDEV number of the
volume you specified as the HTI S-VOL is beyond the specified
range.
The command ended abnormally because you specified an
unmounted volume as the HTI S-VOL.
The command ended abnormally because you specified a blocked
volume as the HTI S-VOL.
The command ended abnormally because you specified a volume
that is in process of being shredded or formatted as the HTI S-
VOL.
The command ended abnormally because you specified a volume
whose emulation type is other than OPEN-V as the HTI S-VOL.
You cannot create the HTI pair because the volume you specified
as the HTI S-VOL has the command device setting.
You cannot create the HTI pair because you specified an external
volume as the HTI S-VOL.
Cause of error