Appendix B Programming Features - Hach Sigma 950 Instrument Manual

Appendix B Programming Features

B.1 Review All Items
To view programmed entries without changing any of the information, select the Review
All Items from the Setup menu. Use the arrow keys to scroll through the setup
information. Press the
B.2 Displaying Data
The Display Data function provides the recorded data for any channel being logged in a
tabular report or a graph.
In addition, for tabular reports, the data can be viewed from the beginning, from the end,
or from a specific point in time. A graph can display any 24-hour period, zoom in to any
portion of the 24-hour period for finer detail, or center the graph on a specific point in
time.
B.3 Selecting the Channel
Note: Only the channels for which logging has been enabled will be listed.
1. Press
2. Highlight the desired channel using the
MAIN MENU
11:00 AM 21 - APR - 01
REVISION:
FLUME TYPE:
FLUME SIZE:
SAMPLER PACING:
FLOW UNITS:
LEVEL:
.
11:00 AM 21 - APR - 01
CHANNEL 3 ppm
CHANNEL 4 ppm
CHANNEL 5 ppm
CHANNEL 6 ppm
CHANNEL 7 ppm
MEMORY MODE
from the Main Menu to display a list of logged channels.
DISPLAY DATA
.
SELECT
11:00 AM 21 - APR - 01
SELECT
RETURN
key to exit.
1.00
PALMER BOWLUS FLUME
12 in.
mgd
gal
in.
NOT LOGGED
NOT LOGGED
NOT LOGGED
NOT LOGGED
NOT LOGGED
WRAP
and
UP DOWN
FLOW
RAINFALL
PH
STATUS SCREEN
STATUS SCREEN
1 min
1 min
1 min
1 min
1 min
arrow soft keys then press
DISPLAY DATA
87