Table of Contents
Advertisement
Section 2
2.1 Required Software
2.2 Programming and Analysis Options
2.3 RS232 Serial Port (All Models)
SoftwareCommunications.fm
Software and Communications
You can program or retrieve data from your flow meter via modem, DTU II, or
direct connection to the RS232 serial port using a PC and one of the following
software packages:
®
•
InSight
Data Analysis Software is a Microsoft Windows
small- to medium-sized flow monitoring jobs.
®
•
Vision
Integrated Sewer System Management Software provides
high-end, automated data collection and automated batch report
processing, using an unlimited number of meters. Vision is a Microsoft
®
Windows
program.
•
Built-in flow equations
•
Pager activation upon alarm condition
•
2-way modem and serial communications
•
Storage of 116,000 data points in battery-backed RAM Memory
•
Storm water sampling trigger
•
Rainfall measurement
•
Flow proportional sampler output
•
High, low, rate of change and trouble alarms
For details on programming your flow meter, refer to your software manual.
The high speed RS232 serial port communicates with a PC or Data Transfer
Unit (DTU) at speeds from 1200 to 19,200 baud as shown in
The optional extension cable (Cat. No. 3358) includes a built-in ladder hook
and is designed to connect to a cable (Cat. No. 1727) near the surface for
easy reach in manholes. See
Figure
2.
Software and Communications
®
program for
Figure
1.
Page 19
Advertisement
Table of Contents
