Planmeca PlanScan User Manual page 46

Sending Cases Through DDX
1 In the CAD/CAM module of the active patient, select the desired case file.
2 Click DDX Export.
If you are currently logged into DDX, you will see details of your other cases.
The available models for the case that you have selected are listed near the bottom of the
screen. Ensure you have a ditched_prep model if your case has equigingival or subgingival
margins. See "Retract" in Chapter 6 for more information.
3 Select STL (3D Models Only) or Native PlanCAD (All Data) as the export type at the bottom
of the screen. Labs must have Romexis PlanCAD software in order to use the PlanCAD data. Ask
your lab which export type they prefer.
4 Click Create a New Case.
5 Select the desired lab from the list of My Labs or Find A Lab.
6 Fill out the form. You must select a Procedure and type the tooth number(s). The rest of the
fields are optional.
7 Click Submit Case.
The system returns to the DDX Cloud screen. Wait for the case to appear in the Existing Files
section.
A red progress bar appears when the case automatically uploads. The screen closes when the
upload is finished.
46 Exporting Data
Note: If you are not already logged into DDX, a login screen will appear.
Note: If the case does not automatically upload, click on the file in Existing Files
Note: A PlanScan panel is available in the Dentrix Chart. See Dentrix user manual
and click the Add Files button.
for details and instructions.
Planmeca PlanScan User Manual