Table of Contents
Advertisement
43
Router-internet is suitable for internet monitoring regardless of distance limits. It relies on servers for the solar monitoring
system. The connection scheme in sketched in figure 35 above. To set up router router internet monitoring, hardware
and software devices such as the AEG AS-IC01 and AS-IC01-2 series solar inverters, AEG WiFi200 communication
modules, routers, devices enabled for WiFi signal reception (such as computer and mobile phones), and AEG
InverterControl solar monitoring software (AEG InverterControl Web Portal / AEG InverterControl App) are needed.
The AEG InverterControl App for Android and for Apple (iOS) devices are available on Google Play and
iTunes Store respectively. For instructions on the use of the apps please refer to
Service > Download Installation Manuals.
The AEG InverterControl Web Portal for monitoring the inverter performances is accessible from the website
www.invertercontrol.com.
6.3.3
Installation
1.
Computer network configuration
The below computer configuration can be referred to as example. Ensure that the computer features a wireless network
card. The card can access the IP address automatically.
After power on, the factory default value is AP hotspot mode. Please connect the hotspot through the wireless network.
The computer can then access the IP address automatically.
PD201709 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.1-17 EN
Figure 36: AEG InverterControl Web Portal
Wired and wireless connections between AEG WiFi200 and routers / monitoring devices
and routers are needed. Please refer to section 6.2.1.3 for detailed operation
www.aeg-industrialsolar.de
>
43
Hide quick links:
Advertisement
Table of Contents
