Functions Operation; Monitoring Parameters - AEG AS-IC01-4000 Installation Instructions Manual

27
All information is displayed on the LCD screen. If there is no button operation in 15 seconds, the LCD screen will dim out
to save power. It can be activated again by pressing any button. When the LCD screen is active, press "ENT" to enter the
main interface. All parameters can be viewed and set on the interface.
The LCD screen features a main interface and menu interfaces, The main interface is the default one when the inverter
is turned on; the menu interfaces are used to set parameters and for other manual operation, such as viewing the
monitoring parameters, history record, system information, statistics fault information, language / time settings,
communication address, password and factory default settings.
Figure 16 above shows the main interface of the LCD screen. The LCD screen displays the following items:
1. Curve. The curve displays the power generation on the current day;
2. Current key parameters of the inverter: three lines of words are displayed at a time, but if the inverter is in
operation or stand-by state, the words are rolling forward in 3s interval. The user can press " " or " " to
look the desired information up;
3. 5 inverter states;
4. Fault codes. If the inverter is in fault or warning state, up to 8 fault codes can be displaying on the screen.

5.4 Functions operation

Most of the parameters can be viewed and set through the LCD screen and operation panel.

5.4.1 Monitoring parameters

Press " " and " " in the main interface to select Monitoring Parameters ("Monit Param"), and then press "ENT" to
view the parameters shown in figure 18. Go the front or next window through " " and " " and return through "ESC".
PD201709 AEG GRID-TIED THREE-PHASE SOLAR INVERTER (4-10 kW) V.1-17 EN
Curve Graphic Text Parameter
Display Area Display Area
Status Area Fault Code
Figure 16: Main interface
M a i n M e n u
M o n i t P a r a m S e t u p
H i s t o r y S y s t e m I n f o
S t a t i s t i c s F a u l t I n f o
Figure 17: Main interface
C u r r e n t S t a t e
E - t o d : 0 W h
$ - t o d : € 0 . 0 0
P - i n : 0 . 0 0 k W
Figure 18: Monitoring parameters
Menu
27