I/O; Diagnostics - ABB ACS-AP-x User Manual

42 Functions in the main Menu
• Clock, region, display: Contains settings for language, date and time, display
(such as brightness) and settings for changing how information is displayed on
screen.
• Reset to defaults: Enables you to reset the Home view to its original factory
state.

I/O

In the I/O menu, each row provides terminal name,
number, electrical status and logical meaning of
the drive. Each row also provides a sub-menu that
provides further information on the menu item and
allow you to make changes to the I/O connections.

Diagnostics

The Diagnostics menu provides you with
diagnostic information, such as faults and
warnings and helps you to resolve potential
problems. Use the menu to make sure that the
drive setup is functioning correctly.
• Start, stop, reference, summary: This view
shows where the drive is currently taking its
start, stop commands and reference. The view
is updated in real time. If the drive is not
starting or stopping as expected, or runs at undesired speed, use this view to find
out where the control comes from.
• Limit status: Describes any limits currently affecting operation. If the drive is
running at undesired speed, use this view to find out if any limitations are active.
• Active faults: Shows the currently active faults and provides instructions on how
to fix and reset.
• Active warnings: Shows the currently active warnings and provides instructions
on how to fix and reset.
• Fault & event log: Lists the faults, warnings and other events that have occurred
in the drive.
• Fieldbus: Provides status information and sent and received data from fieldbus
for troubleshooting.
• Load profile: Provides status information of load distribution (that is, drive
running time spent on each load level) and peak load levels.