Bluetooth Interface; Fcc And Ic Certification; Fcc Id: 2Afngapwseries - ABB ACS-AP-x User Manual

Sinusoidal vibration
Shock
Free fall
EMC compliance
(EN 61800-3: 2004)

Bluetooth interface

Bluetooth standard

FCC and IC certification

The following are the FCC and IC certification compliance identification numbers
which are valid for ACS-AP-W panel type and Bluetooth.

• FCC ID: 2AFNGAPWSERIES

• IC: 20555-APWSERIES

FCC ID: 2AFNGAPWSERIES
The ACS-AP-W wireless assistant control panel complies with part 15 of the FCC
rules.
The operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment is tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which the user is required to correct the interference at his own
expense.
Note: Modifications not expressly approved by ABB Oy could void the user's
authority to operate the equipment.
Operation Storage
61800-5-1 ed 2.
EN 60082-2-6 test
Fc (1g)
class 3M4 in acc.
with
EN 60062-2-27
IEC-60068-2-32,
drop height 1 m.
(3.3 ft.)
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4,
IEC 61000-4-6
Bluetooth 4.0 Dual mode (smart ready)
Technical data 63
Transportation
class 2M3 in acc.
with
EN 60082-2-6
class 2M2 in acc.
with
EN 60082-2-27