Adding Parameters To The Home View; Editing Parameters - ABB ACS-AP-x User Manual



Adding parameters to the Home view

When you view a read-only parameter in the Parameters menu, you can add the
parameter to the Home view.
• Press
Home view in the editing mode then you
can add the parameter to an empty display
slot or replace an existing parameter with it.
• Press
parameter view.
Editing the Home view functions are described in
more detail in Editing the contents of the Home
view (page 44).


Editing parameters

You can edit parameter values with the arrow keys.
(
1. Press Select) to select the desired parameter from the list.
2. Press (Edit).
3. Use and
4. Press (Save) to save the value, or press
parameter view and discard any changes.
5. Press +
See the sections below for more information on editing specific parameter types.
(Add to view) to open the
(Back) to go back to the
to change the value.
to restore the default value of the parameter (this does not save it).
Functions in the main Menu 33
(Cancel) to exit the