Start And Stop - ABB ACS-AP-x User Manual

18 Control panel overview
Help
The help key ( opens a help page. The help page is context-sensitive, in other
? )
words, the content of the page is relevant to the menu or view in question. See
(page 24) for more information on the help page.

Start and Stop

In local control, the start key (
respectively.
Loc/Rem
The location key (
(Local) and remote connections (Remote). When switching from Remote to Local
while the drive is running, the drive keeps running at the same speed. When
switching from Local to Remote, the status of the remote location is adopted. See the
drive-specific firmware manual for more details.
Key shortcuts
The table below lists key shortcuts and combinations. Simultaneous key presses are
indicated by the plus sign (+).
Shortcut Available in
+
any view
+
+ ,
any view
+
+ ,
any view
+
or
Home view
+
parameter edit views Revert an editable parameter to its default value.
+
any view
any view
(keep down)
) and the stop key (
) is used to switch the control between the control panel
Loc/Rem
Effect
Save a screenshot. Up to fifteen images can be stored
in the control panel memory. For instructions on how to
transfer the images into a PC, see section
files between the control panel and a PC
Adjust backlight brightness.
Adjust display contrast.
Adjust reference.
Show/hide parameter index and parameter group
numbers.
Return to Home view by pressing down the key until
Home view is shown.
) start and stop the drive,
Transferring
(page 60).
Help