System Usb Usb1 Configure; System Usb Usb2 Configure; System Groups Configure - D-Link DWC-1000 Reference Manual

Wireless Controller
7 increase_limit_enable Enable/Disable status of increase limit of the traffic meter option
8 increase_limit_by Set the value to increase limit of the traffic meter
9 counter set traffic counter as either specific time or restart counter now
10 time_hour set hours for restart time
11 time_minute set minutes for restart time
12 day_of_month set day of month
13 send_email_report Enable/Disable send email report
Set block Traffic type 0(block all traffic) 1(block all traffic except
14 block_type
email)
15 send_email_alert Enable/Disable send email alert

9.18 system usb usb1 configure

S.No Com mand Nam e Description
1 save Save Configurable OPTION settings.
2 exit Save configurable OPTION settings and exit current mode.
3 cancel Roll back Configurable OPTION settings changes.
4 enable Enable USB1
5 printer_enable Enable printer usb
6 Storage_enable Enable Storage USB
7 usb_type Select the USB type 3G_USB_ADAPTOR/USB_Disc

9.19 system usb usb2 configure

S.No Com mand Nam e
1 save
2 exit
3 cancel
4 enable
5 printer_enable
6 Storage_enable
7 usb_type

9.20 system groups configure

Com mand
S.No Description
Nam e
1 save Save system group configuration changes.
Description
Save USB1 Settings settings.
Save USB2 settings and exit current mode.
Roll back Configurable OPTION settings changes.
Enable USB2
Enable printer
Enable USB2
Select the USB type 3G_USB_ADAPTOR/USB_Disc
60
CLI Reference Guide
Unsigned integer
Boolean choice
Unsigned integer
traffic counter type
HH(00-23) using 24 hour
clock
minute in the format MM(00-
59)
Calendar day of month
Boolean choice
block traffic type.
Boolean choice
Type and Description
Boolean choice
Boolean choice
Boolean choice
usb device type
Type and Description
Boolean choice
Boolean choice
Boolean choice
usb device type
Type and
Description