Wlan Ap_Management Manual Configure <Macaddr - D-Link DWC-1000 Reference Manual

Wireless Controller
31 w lan client
32 w lan client add <macaddr>
33 w lan client edit <macaddr>
34 w lan client delete <macaddr>
35 w lan global
36 w lan global dist_tunnel
37 w lan global snmp_trap
38 w lan global dist_tunnel configure
39 w lan global snmp_trap configure
40 w lan global configure
41 w lan peer_controller
42 w lan peer_controller configure
43 w lan peer_controller push_configuration <ipaddr>
44 w lan w ids_security
45 w lan w ids_security ap
46 w lan w ids_security client
47 w lan w ids_security ap configure
48 w lan w ids_security client configure
49 w lan w lan_global_setting
50 w lan w lan_global_setting ap_validation
51 w lan w lan_global_setting radius_server
52 w lan w lan_global_setting country
53 w lan w lan_global_setting ap_validation configure
54 w lan w lan_global_setting radius_server configure
55 w lan w lan_global_setting country configure
56 w lan w lan_global_setting wireless_switch <enable>
8.1 wlan ap_management manual configure
<macaddr>
S.No Com mand Name
1 <macaddr>
2 save
3 cancel
4 exit
5 radio
6 channel
7 pow er
8 debug
9 reset
Description
w lan ap_management manual configuration
mode
Save ap management configuration changes
Roll back ap management configuration
changes.
Save ap management configuration changes
and current mode.
Configure radio on a managed access points.
Configure managed access points channel
value.
Enter the transmit pow er
Enable/Disble debugging on Managed AP
Reset a WS managed AP.
Configure know n client parameters.
w lan client configuration mode
w lan client configuration mode
w lan client configuration mode
Global Configuration
Configure the L2 Distributed Tunneling
parameters
Wireless sw itch SNMP trap configuration.
w lan global distributed tunnel configuration
mode
w lan global snmp_trap configuration mode
w lan global configuration mode
Configure peer sw itch configuration push
groups.
w lan peer_controller configuration mode
Start the configuration push for one peer
sw itches.
Configure the WIDS security parameters.
Configure the WIDS security parameters
for AP
Configure WIDS Client Security
Parameters.
w lan w ids_security ap configuration mode
w lan w ids_security client configuration
mode
Wireless Global Configuration
Configure the AP validation method.
RADIUS related parameters.
country code for the w ireless network
w lan ap_validation configuration mode
w lan radius_server configuration mode
w lan country configuration mode
Enable/Disable the w ireless switch
Type and Description
MAC address AA:BB:CC:DD:EE:FF w here
each part is in the range 00-FF
w ireless radio interface
Unsigned integer
range of pow er perventage
Boolean choice
Boolean choice
39
CLI Reference Guide