D-Link DWC-1000 Reference Manual page 35

Wireless Controller
79 net routing protocol_binding disable <ltrow_id>
80 net routing protocol_binding delete <ltrow_id>
81 net radvd
82 net radvd pool
83 net radvd configure
84 net radvd pool add
85 net radvd pool edit <ltrow_id>
86 net radvd pool delete <ltrow_id>
87 net routing dynamic
88 net routing dynamic configure
89 net routing
90 net routing static
91 net routing static ipv4
92 net routing static ipv6
93 net routing static ipv4 configure <ltname>
94 net routing static ipv6 configure <ltname>
95 net routing static ipv4 delete <ltname>
96 net routing static ipv6 delete <ltname>
97 net routing static ipv4 deleteAll
98 net routing static ipv6 deleteAll
99 net tahi
100 net tahi add-default-route <ltip_address>
101 net tahi delete-default-route
102 net tahi add-route <ltip_address> <ltgw>
103 net tahi del-route <ltip_address> <ltgw>
104 net tahi stop-RA
105 net tahi start-RA-AdvRetransTimer(1000)
106 net tahi start-RA-AdvRetransTimer(5000)
107 net tahi startRA-Reachable(30000)Retrans(1000)
108 net tahi start-RA-AdvReachableTime(10000)
109 net tahi start-RA-AdvReachableTime(30000)
110 net tahi start-RA(Default)
111 net tahi start-RA-MinValues
112 net tahi start-RA-MaxValues
113 net tahi start-RA-MaxRtrAdvInterval(10)
114 net tahi start-RA-MaxRtrAdvInterval(40)
115 net tahi start-RA-MinRtrAdvInterval(198)
116 net tahi start-RA-prefix(8000::)
117 net tahi start-RA-prefix(fec0::)
118 net tahi start-RA-AdvCurHopLimit(0)
protocol_binding rules configuration
mode.
protocol_binding rules configuration
mode.
RADVD configuration setup.
RADVD configuration setup.
radvd configuration mode.
radvd Pool configuration mode.
radvd Pool configuration mode.
radvd pool configuration mode.
Configure the routes dynamically.
configure the routes dynamically.
configure routing mode, static and
dynamic route(s).
Configure the routes.
Configure the routes.
Configure the IPV6 routes.
Add new static routes.
Add new IPV6 static routes.
Delete a specific route.
Delete a specific IPV6 route.
Delete all the configured routes.
Delete all the configured IPV6 routes.
settings for tahi test suite.
add ipv6 default route on lan
interface.
delete ipv6 default route on lan
interface.
add ipv6 route on lan interface.
add ipv6 route on lan interface.
stop sending RA.
start sending RA w ith
AdvRetransTimer as 1000.
start sending RA w ith
AdvRetransTimer as 5000.
start sending RA w ith
AdvReachableTime as 30000 and
AdvRetransTimer as 1000.
start sending RA w ith
AdvReachableTime as 10000.
start sending RA w ith
AdvReachableTime as 30000.
start sending RA w ith default
parameters.
start sending RA w ith minimum
values of parameters.
start sending RA w ith maximum
values of parameters.
start sending RA w ith
MaxRtrAdvInterval value of 10.
start sending RA w ith
MaxRtrAdvInterval value of 40.
start sending RA w ith
MinRtrAdvInterval value of 198.
start sending RA w ith prefix 8000::/64.
start sending RA w ith prefix fec0::/64.
start sending RA w ith
AdvCurHopLimit value as 0.
33
CLI Reference Guide