Chapter 13. Configuration Commands Vpn; Vpn L2Tp Server Configure; Vpn Pptp Client Configure - D-Link DWC-1000 Reference Manual

Wireless Controller
Chapter 13. Configuration commands

13.1 vpn l2tp server configure

S.No Com mand Nam e Description
1 save Save l2tp server configuration changes.
2 cancel Roll back l2tp server configuration changes.
Save l2tp server configuration changes and
3 exit
exit current mode.
4 enable enable/disable L2TP server.
5 start_address L2TP server starting IP address.
6 end_address L2TP server ending IP address.
7 EnablePap enable pap authentication
8 EnableChap enable chap authentication
9 EnableMSChapChap enable MSchap authentication
10 MSChapv2Enable enable MSChapv2Enable authentication
11 l2tpSecretKeyEnable L2TP Enanle secret key
12 secretKey L2TP secret Key

13.2 vpn pptp client configure

Com mand
S.No Description
Nam e
1 save Save pptp client configuration changes.
2 cancel Roll back pptp client configuration changes.
Save pptp client configuration changes and
3 exit
exit current mode.
4 enable enable/disable PPTP client.
5 server_address PPTP server IP address.
6 remote_netw ork Remote Netw ork Address
7 remote_subnet Remote Netw ork Subnet Mask
8 username Username allocated to client
VPN
110
Type and Description
Boolean choice
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
Boolean choice
Boolean choice
Boolean choice
Boolean choice
Boolean choice
String
Type and Description
Boolean choice
IP address AAA.BBB.CCC.DDD w here each part is
in the range 0-255
IP address AAA.BBB.CCC.DDD w here each part is
in the range 0-255
Unsigned integer
String
CLI Reference Guide