D-Link DWC-1000 Reference Manual page 125

Wireless controller
Hide thumbs Also See for DWC-1000:
Table of Contents

Advertisement

Wireless Controller
29
general_enable_keepalive
30
general_keepalive_sourceip
31
general_keepalive_destinationip
32
general_keepalive_detection_period keepalive detection period
33
general_keepalive_failure_count
34
manual_spi_in
35
manual_spi_out
36
manual_encryption_algorithm
37
manual_key_length
38
manual_encryption_key_in
39
manual_encryption_key_out
40
manual_authentication_algorithm
41
manual_authentication_key_in
42
manual_authentication_key_out
43
auto_phase1_exchange_mode
44
auto_phase1_enable_nat_traversal
45
auto_phase1_nat_keepalive_frequecy Setting IKE nat alive frequency
46
auto_phase1_local_identtype
47
auto_phase1_direction_type
48
auto_phase1_local_identifier
49
auto_phase1_remote_identtype
50
auto_phase1_remote_identifier
51
auto_phase1_encryption_algorithm
52
auto_phase1_key_length
53
auto_phase1_auth_algorithm
54
auto_phase1_auth_method
55
auto_phase1_dh_group
enable/disable keepalive
keepalive sourceip
keepalive destinationip
keepalive failure count
Takes a hexadecimal value betw een
3 and 8 characters.
Takes a hexadecimal value betw een
3 and 8 characters.
The algorithm used to encrypt the
data
The key length for the algorithm.
Encryption key of the inbound policy.
The length of the key depends on the
algorithm chosen
Encryption key of the outbound
policy. The length of the key depends
on the algorithm chosen.
Algorithm used to verify the integrity
of the data.
This is the integrity key (for ESP w ith
Integrity-mode) for the inbound policy
and depends on the algorithm
chosen
This is the integrity key (for ESP w ith
Integrity-mode) for the outbound
policy and depends on the algorithm
chosen
Setting IKE exchange Mode
Enabling/Disabling Nat traversal
Setting IKE local identifier type
Setting IKE direction type
Setting IKE local identifier
Setting IKE remote identifier
Setting IKE remote identifier
Setting IKE encryption algorithm
The key length for the algorithm.
Setting IKE authentication algorithm IPsec VPN IKE authentication
Setting IKE authentication algorithm
method
Setting IKE Diffie-Hellman (DH)
123
CLI Reference Guide
IPv6 Prefix length
Boolean choice
Takes a hexadecimal value betw een 3
and 8 characters
Takes a hexadecimal value betw een 3
and 8 characters
vpn encryption algorithm
Unsigned integer
String
String
vpn authentication algorithm
String
String
VPN Exchange Mode
Boolean choice
Unsigned integer
IPsec VPN IKE local identifier type
IPsec VPN IKE direction Mode
String
IPsec VPN IKE local identifier type
String
IPsec VPN IKE encryption algorithm
type
Unsigned integer
algorithm type
IPsec VPN IKE authentication
algorithm method

Advertisement

Table of Contents
loading

Table of Contents