HPE ProLiant ML110 Gen10 User Manual page 71

• Server in rack mode: Remove the server from the rack on page 20.
• Server in tower mode: Place the server on its side and access panel facing up.
4. Remove the access panel on page 21.
5. Remove the system air baffle on page 26.
6. Disconnect all power supply cables from the system board, drive cages, and devices.
7. Remove the existing power supply.
8. Insert and install the RPS bracket into the bay.
9. Grab the power supply cables from the RPS backplane assembly and then insert the backplane into the
bay carefully.
Hardware options installation 71