Bt ® Pairing: Enabling Bluetooth ® Pairing; Interface Information - M2TECH YOUNG MKIII User Manual

YOUNG M III
K
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.0 – SEPTEMBER 2017
®
7.5.14. BT PAIRING: Enabling Bluetooth
User may connect a Bluetooth
achieve this, the YOUNG M
audio sink can detect it and connect to it.
Once enabled, pairing mode is operative for 3 minutes, then it's automatically disabled.
User can, however, disable pairing before the 3 minutes expire.
Below please see the display indications while the pairing is enable and the YOUNG M
waiting for a host to pair, right after a successful pairing and when pairing is disabled.
BT PCM -6.0dB
UNLOCK BT PAIR.
All paired hosts data are stored by the Bluetooth
restored (see "DEFAULT" item in the menu description).
®
7.5.15. BT INFO: Accessing Bluetooth
It may be useful to know certain information about the YOUNG M
®
interface can be used to recognize the YOUNG M
The Bluetooth
®
Bluetooth devices in your smartphone.
YOUNG MKIII-ABCD
Please note that in the real world the 4 letter "ABCD" are replaced by a unique value for
your YOUNG M III.
K
®
host, such as a smartphone, to the YOUNG M
III must be set in pairing mode, so that hosts looking for an
K
BT PAIRING
BT PAITING
ENABLE
BLUETOOTH
BT DEVICE NAME
®
Pairing
SETUP
BT PAITING
DISABLE
PAIRED!
®
interface until factory settings are
®

Interface Information

SETUP
BT INFO
MAC ADDR : 12 : 34 :
: 56 : 78 : AB : CB
27
M2Tech
www.m2tech.biz
III. To
K
BT PCM -6.0dB
44.1K
®
III Bluetooth
K interface.
III in the list of accessible
K
Copyright © 2017, M2Tech Srl
III is
K