Auto Off: Setting The Automatic Switch-Off; Standby Led: Setting The Front Panel Led Behaviour; Auto On: Setting The Young Mkiii Behaviour When Power Is Applied - M2TECH YOUNG MKIII User Manual

YOUNG M III
K
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.0 – SEPTEMBER 2017

7.5.9. AUTO OFF: Setting the Automatic Switch-off

To comply with UE requirements regarding energy saving, the YOUNG M
automatically switch off after a certain idle time. Idle means a time lapse in which user
didn't access any control, like volume or mute.
User can set the auto switch-off time (between 10 and 240 minutes in 10 minutes steps) or
he/she can disable this feature.
NOTE: To disable this feature, the value "OFF" must be selected, which is one of the
allowed values.

7.5.10. STANDBY LED: Setting the Front Panel LED behaviour

The front panel LED of the YOUNG M
modes, at user's convenience:
 ON: the LED will be continuously blowing when the YOUNG M
 FLASHING: the LED will blink when the YOUNG M
 OFF: the LED will be off when the YOUNG M
STANDBY LED
ON

7.5.11. AUTO ON: Setting the YOUNG MKIII Behaviour when power is applied

The YOUNG M III may have different behaviours when power is applied to its power socket
K
(Fig. 3, 14).
User may choose to have the Young immediately on and operative or wait for the front
panel button (Fig. 2, 1) to be pressed.
When the YOUNG M
preferred choice. On the other hand, when the YOUNG M
AUTO OFF
AUTO OFF
OFF
III (Fig. 1, 2) can be set to operate in three different
K
STANDBY LED
STANDBY LED
FLASHING
III is used standalone with its stock wall adaptor, the latter is the
K
SETUP
AUTO OFF
50 MIN
III is in standby
K
III is in standby
K
SETUP
III is used with the VAN DER GRAAF
K
25
M2Tech
www.m2tech.biz
III is able to
K
III is in standby
K
STANDBY LED
OFF
Copyright © 2017, M2Tech Srl