Surveying The Auto Points - Leica GPS900 Series Technical Reference Manual

33.3
Description
Surveying auto points
Working with Survey

Surveying the Auto Points

Auto points is used to automatically log points at a specific rate. Auto points are used in
real-time moving applications to document the track which was walked or driven along. Auto
points are logged between starting and stopping logging of auto points form one chain. A
new chain is formed each time logging of auto points is started. Auto points can be collected
in the Survey program.
Before logging of auto points has started, the
default page appears as shown:
START (F1)
To start logging of auto points and offset
points if configured or, for Log By: User
Decides, to start the chain to which the auto
points should be assigned. The first auto
point is stored.
STOP (F1)
To end recording of auto points and offset
points if configured or, for Log By: User
Decides, to end the chain to which the auto
points are assigned.
OCUPY (F3)
Available for STOP (F1). To store an auto
point at any time.
PAGE (F6)
To change to another page on the screen.
SHIFT CONF (F2)
To configure auto points.
GPS900 261