Surveying The Points - Leica GPS900 Series Technical Reference Manual

33.2
Surveying points
Working with Survey

Surveying the Points

Field Description of Field
Point ID The identifier for occupied points.
Antenna Ht The antenna height
3D CQ The current 3D coordinate quality of the computed position.
OCUPY (F1)
To start measuring a point. The position
mode icon changes to the static icon. (F1)
changes to STOP.
STOP (F1)
To end measuring a point when enough data
is collected. When Auto STOP: Yes in
CONFIGURE Point Occupation Settings, the
measurement ends automatically as defined
by the stop criteria. The position mode icon
changes to the moving icon. (F1) changes to
STORE.
STORE (F1)
To store the point information. When Auto
STORE: Yes in CONFIGURE Point Occupation
Settings, the measured point is stored auto-
matically. (F1) changes to OCUPY.
PAGE (F6)
To change to another page on the screen.
SHIFT CONF (F2)
To configure auto points measurements.
GPS900 260