Resistance Measurement - AEMC 565 User Manual

4.5 Resistance Measurement

• Turn the rotary range switch to the
• Insert the red test lead to the red "+" input jack and
the black lead to the black "COM" input jack.
• Bring the test probe tips into contact with the sample
under test.
1.800.561.8187
20
WARNING: When testing Resistance, make
sure that there is no power in the tested sample
or circuit (dead circuit). Also make sure the cur-
rent is fully discharged. This may be checked by
using the voltage functions.
www.
information@itm.com
.com
Clamp-on Meter Model 565
range.