Stamina 55-1541B Owner's Manual
  1. Manuals
  2. Brands
  3. Stamina Manuals
  4. Fitness Equipment
  5. 55-1541B
  6. Owner's manual

Stamina 55-1541B Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Product May Vary Slightly From Pictured.
CAUTION:
Weight on this product should not exceed 250 lbs.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
www.staminaproducts.com
Customer Care
1 (800) 375-7520
Owner's
Manual
WARNING
!
Exercise can present a
h e a l t h r i s k . C o n s u l t a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
d i s c o n t i n u e u s e o f t h i s
equipment. Serious bodily
i n j u r y c a n o c c u r i f t h i s
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.
When calling for parts or
service, please specify
the following number :
Model#: 55-1541B
STAMINA PRODUCTS
MADE IN CHINA
©
2016 Stamina Products, Inc.
2017, 06
!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 55-1541B and is the answer not in the manual?

Questions and answers

Related Manuals for Stamina 55-1541B

Summary of Contents for Stamina 55-1541B

  • Page 1 CAUTION: Weight on this product should not exceed 250 lbs. This Product is Produced Exclusively by STAMINA PRODUCTS MADE IN CHINA 2040 N. Alliance, Springfield, MO 65803 Customer Care © 2016 Stamina Products, Inc. 1 (800) 375-7520 2017, 06 www.staminaproducts.com...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Safety Instructions ........2 Maintenance ..........15 Before You Begin ........4 Product Parts Drawing ......16 Equipment Warning & Notice Labels ..5 Parts List ............ 17 Hardware Identification Chart ....6 Warranty ............. 19 Assembly Instructions ........ 7 Notes ............
  • Page 3 1 (800) 375-7520 customer.care@staminaproducts.com Hi! From all of us here at Stamina Products, thank you for your purchase. We know that you have big fitness goals in mind and we are here to help you along. Call us, email us, or send us a message on Facebook. Be sure to contact us if you have any questions on your new product.

  • Page 4: Before You Begin

    BEFORE YOU BEGIN Thank you for choosing the Seated Inversion Although Stamina constructs its products with Therapy System. We take great pride in producing the finest materials and uses the highest standards this quality product and hope it will provide many...

  • Page 5: Equipment Warning & Notice Labels

    EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning and notice labels on the Seated Inversion Therapy System. Please take a moment to familiarize yourself with all of the warning and notice labels. Labels are larger than actual size WARNING LABEL(64) WARNING Keep others including children &...

  • Page 6: Hardware Identification Chart

    HARDWARE IDENTIFICATION CHART This chart is provided to help identify the fasteners used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws.

  • Page 7: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed.
  • Page 8 ASSEMBLY INSTRUCTIONS NOTE: Do not over tighten BUTTON HEAD BOLTS(53, 54) as the FRONT and REAR PIVOT ARMS(3, 5) must be able to pivot freely after BUTTON HEAD BOLTS(53, 54) are tightened. STEP 2 Position the SWING BAR(11) at the front of the BUMPER(37). Attach the FRONT PIVOT ARMS(3) to the FRONT FRAME(1) with BUTTON HEAD BOLTS(M12x1.75x85mm)(53) on both sides.
  • Page 9 ASSEMBLY INSTRUCTIONS STEP 6 Insert the BACK FRAME(9) into the BACK PIVOT FRAME(8) and secure BUTTON HEAD BOLTS (M8x1.25x15mm)(46). STEP 7 Refer to the Bottom View of the illustration below. Align the hook and loop material on the HINGE WEAR COVER(34) and the SEAT(32), then press them to attach together.
  • Page 10 ASSEMBLY INSTRUCTIONS STEP 9 Attach the SEAT BELT(31) to the BACK FRAME(9) with BUTTON HEAD BOLT(M8x1.25x15mm)(46). CAUTION: Always use the SEAT BELT(31). Make sure the SEAT BELT(31) is securely fastened before inverting. STEP 10 Refer to the Back View of the illustration below. Align the hook and loop material on the HINGE WEAR COVER(34) and the BACK CUSHION(33), then press them to attach together.
  • Page 11 ASSEMBLY INSTRUCTIONS STEP 11: Insert the upper end of the HANDRAIL(35) into the FRONT FRAME(1) and secure with BUTTON HEAD BOLT(M8x1.25x25mm)(47) and ARC WASHER(M8)(62). Do not tighten the bolt. Attach the lower end of the HANDRAIL(35) to the REAR FRAME(2) with BUTTON HEAD BOLT(M8x1.25x15mm)(46), BUTTON HEAD BOLT(M8x1.25x50mm)(49), and ARC WASHERS(M8) (62).

  • Page 12: Operational Instructions

    OPERATIONAL INSTRUCTIONS GENERAL PRECAUTIONS 1. Do not use the Seated Inversion Therapy System alone. Always have a helper available in case assistance is needed in recovering from the decline position. 2. Always use the SEAT BELT(31). Make sure the SEAT BELT(31) is securely fastened before inverting. 3.
  • Page 13 OPERATIONAL INSTRUCTIONS FOAM PAD USE AND LEVER ADJUSTMENT 1. Place your feet under the FOAM PADS(20) with your ankles between the FOAM PADS(20). 2. Pull the KNOB(19) and swing the LEVER(13) toward you until your ankles are comfortably yet firmly held between the FOAM PADS(20).
  • Page 14 OPERATIONAL INSTRUCTIONS THE HANDRAILS The HANDRAILS(35) are located on both sides of the Seated Inversion Therapy System. The HANDRAILS(35) are to help you return from inversion to the upright position. Pull the HANDRAILS(35) to return to an upright position. USING THE SEATED INVERSION THERAPY SYSTEM 1.

  • Page 15: Storage

    System removed from service until repair is made. 5. Verify that the WARNING LABELS(64) and INVERSION WARNING DECAL(70) are in place and easy to read. Call Stamina Products immediately at 1-800-375-7520 for a replacement label if one is missing or damaged.

  • Page 16: Product Parts Drawing

    PRODUCT PARTS DRAWING BACK FRONT...

  • Page 17: Parts List

    PARTS LIST PART# PART NAME Front Frame Rear Frame Front Pivot Arm Shaft Rear Pivot Arm Seat Frame Seat Frame Connecter Back Pivot Frame Back Frame Linkage Swing Bar Leg Adjustment Frame Lever Lever Bushing Claw Bar Spring Support Washer Retaining Cap Knob Foam Pad...
  • Page 18 PARTS LIST PART# PART NAME Bolt, Button Head (M8 x 1.25 x 40mm) Bolt, Button Head (M8 x 1.25 x 50mm) Bolt, Button Head (M8 x 1.25 x 55mm) Bolt, Button Head (M8 x 1.25 x 60mm) Bolt, Button Head (M10 x 1.5 x 45mm) Bolt, Button Head (M12 x 1.75 x 85mm) Bolt, Button Head (M12 x 1.75 x 95mm) Screw, Round Head (M4 x 6mm)

  • Page 19: Warranty

    To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield Missouri, USA, 65801-1071, or email us at customer.care@staminaproducts.com, or call us at 1-800-375-7520.

  • Page 20: Notes

    NOTES...
  • Page 21 NOTES...

  • Page 22: Fax/Mail Ordering Form

    P.O. Box 1071 Springfield, MO. 65801-1071 Would you like to recieve email information or special offers from Stamina Products? Register at contact.staminaproducts.com TO REGISTER YOUR PRODUCT To enact your warranty, please register your product by going to register.staminaproducts.com. Please have your product model number (printed on the cover of this owner’s manual) and the serial number (printed on the black and white sticker on your...

Table of Contents