Storage; Maintenance - Stamina 55-1550 Owner's Manual

STORAGE

1. To store the InLine® Inversion Chair, simply keep it in a clean dry place.
2. Move the InLine® Inversion Chair by lifting the frame and moving slowly.
NOTE: Two people are required to move the InLine® Inversion Chair.

MAINTENANCE

The safety and integrity designed into the InLine® Inversion Chair can only be maintained when the
InLine® Inversion Chair is regularly examined for damage and wear. Special attention should be given
to the following:
1. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
2. Check the angle adjustment belt, seat belt, pivot arms, cushions, foam pads, adjustment knob, and
lever device for damage and wear.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Worn or damaged components shall be replaced immediately or the InLine® Inversion Chair
removed from service until repair is made.
5. Verify that the WARNING LABEL(62) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement WARNING LABEL(62) if it is missing or damaged.
6. Only Stamina Products supplied components shall be used to maintain/repair the InLine® Inversion
Chair.
7. Keep your InLine® Inversion Chair clean by wiping it off with an absorbent cloth after use.
16