ASSEMBLY INSTRUCTIONS
STEP 8
Refer to detail view A and the illustration below. Attach the ANGLE ADJUSTMENT BELT(16) to the
FRONT SUPPORT(2) with BUTTON HEAD BOLT(M8x1.25x60mm)(44), WASHERS(M8)(53), and
NYLOCK NUT(M8x1.25)(58).
STEP 9
Refer to the bottom view of the illustration below. Align the hook and loop pad on the HINGE WEAR
COVER(15) and the SEAT(13), then press them to attach together.
STEP 10
Attach the SEAT(13) to the SEAT FRAME(7) with ROUND HEAD BOLTS(M6x1x20mm)(51) and
WASHERS(M6)(55).
A.
hook and
loop pad
10
Bottom View