Table of Contents
Advertisement
3.6.3 Unit Menu
This window enables the display of measurements either in V/m (unit by default) or in
W/m² or mW/cm².
The active unit is inaccessible.
Warning ! A change of unit is only possible if a measurement file has been loaded.
3.6.4 EME Guard Menu
Only the administrator can access the submenus Configure and Read the calibration
dates in the EME Guard menu.
1.
Configure: like the Configure button on the main interface, enables the dosimeter
to be configured (measurement recording cycle, alarms, information, date and time).
2.
Read the calibration dates: enables the last and next calibration dates of the
connected device to be displayed. To access this information, connect the device to the
computer. When the device has been connected, the following dialog box is displayed:
The dates and serial number of the dosimeter are displayed in the text boxes of the dialog
box.
Figure 39 : Unit Menu
Figure 40 : EME Guard Menu
Figure 41 : Calibration Date
35 / 37
Advertisement
Table of Contents
